|
Product Details:
Payment & Shipping Terms:
|
1. Overview
ASI to IP bidirectional adapter is used for front-end interface equipment of DVB and Ethernet, IP stream transmitter of sending end of program, could make TS stream of MPEG 2 converted into IP data stream for transmission; IP strange receiver of receiving end of program, could make IP data stream of the transmission equipment reverted into TS stream of MPEG 2 for ASI output
2. Features
3. Specification
| ASI to IP | |
| Input interface | 1 DVB-ASI |
| Output interface | 1 RJ45 |
| Interface Features | ASI-DVB standard |
| IP to ASI | |
| Input interface | 1 RJ45 |
| Output interface | 2 DVB-ASI (The same output) |
|
ASI Interface |
Input interface: 2-ch DVB standard ASI interface |
| Connector: BNC; impedance: 75Ω | |
| Transmission stream standard: ISO13818-1 | |
| Input effective rate: Max. 214Mbps (every channel) | |
| TS packet format:188/204bytes (Automatic Identification) | |
| TS input mode: uniformity / packet bursting / irregular | |
| Network Management Interface | Ethernet interface: IEEE802.3 Ethernet, RJ45 interface |
| Software protocol: UDP/IP | |
| Power-down status of preservation |
Save the last used status, the encoder recovers power and could start automatically and correctly |
| Radiation and safety requirements | Comply with GB13837-92 and GB8898-88 standard |
| Operating environment | |
| Operating temperature | -40℃～＋45℃ |
| Average power consumption | 10.5 W |
| Relative temperature | 10-90% |
| No failure of average working time | ﹥100000 hours |
| Physical features | |
| Volume | 44.5mm(Height, 1U)×483mm(Width, 19″)×410mm (Depth) |
| Weight(KG) | 4KG |
4. Network Management
