Payment & Shipping Terms:
The Digital Visual Interface is a high-quality, uncompressed data link between a host processor video card and a display peripheral. DVI Optical technology for this transmission stretches the performance beyond the limitations of copper wire.
DVI Fiber Extender module consists of transmitter module and receiver module, each of which has 2XLC connectors and a 20-pins DVI–D plug. Users could decide extension length at their discretion by choosing the length of fiber-optic cables with LC ferrules at the ends. It offers graphic TMDS signals to be extensible up to the limits of modal bandwidth of selected multi-mode glass fibers, or single mode fiber. A transmitter has 4 Laser inside and a receiver has 4 Pin-PDs inside. and each transmitter or Receiver also has a WDM filter inside, which combine the 1310nm laser and 1550nm laser into one fiber. it has a capability to transmit UXGA (1600X1200) graphic signals with 60Hz refresh rate. At such data bandwidth, this module can extend up to 1,640 feet (500 meters) much over the limits of copper wire extension, without any distribution amplifier or repeater.
4. Ordering Information
DVI Fiber Optic Extender
FL3202M: 1-ch DVI, dual, single mode, 500Meter for MM mode or 1.5KM for single mode, MiNI type.
|Components||Laser Diodes in Tx Module||1310nm/1550nm FP Laser|
|Photo Diodes in Rx Module||InGaAs PIN-PD|
|Electrical||Input and Output Signals||TMDS Level (complying with DVI1.0)|
|Data Transfer Rate (Graphic Data)||Max. 1.65Gbps|
|Total Jitter at the end of Rx output||Max. 309 ps|
|Skew inter-channels||Max. 6ns|
|Optical||Link Power Budget||Min 10.5dB|
|Mechanical||Module dimension (mm)||42WX16HX69L|
|Connect||Optical Connector||1 Duplex LC connectors|
|Electric Connector Type from Systems and to Displays||24 pin DVI-D plug|
|Recommended Fiber||50/125 um Multi-mode Glass Fiber for 500m; 9/125um single-mode fiber for 1500m.|
Any interest, please contact
Email: email@example.com Skype: alston224